Read all instructions before assembling or op-
erating the tow dolly. Failure to understand how to
assemble or operate the tow dolly could result in
property damage, personal injury or even death.
Musts for installation safety
1.
Before starting the installation, lay out the kit com-
ponents in order, as they will be used. This will give
you a visual idea of how the components work, and will
also confirm that everything is present and accounted
for.
2.
The assembler must use all bolts and parts supplied
as instructed.
3.
The assembler and owner must read and understand
all instructions and heed all warnings within the owner’s
manual, the literature packet and on the dolly before
loading any vehicle onto the dolly.
4.
The owner must check with and comply with all lo-
cal, state, federal or provincial requirements regarding
tow dollies.
5.
The assembler must wear eye protection while as-
sembling the tow dolly.
6.
The assembler must show the owner how to properly
load, unload and tow his vehicle.
7.
The assembler must caution the owner to use a
trailer ball, ball mount and receiver that are rated at
5,000 pounds or more.
8.
Vehicles must be loaded with the front wheels on
the dolly.
9.
The owner must be certain that any rear wheel drive
vehicle is towable on the dolly without damaging the
transmission. Rear wheel drive vehicles may require
a drive line disconnect to prevent transmission dam-
age.
10.
The assembler must stress the importance of the
owner sending in the product registration card. The
warranty is only valid if the owner sends in his product
registration card within 30 days. Warranty registration
will allow us to expedite a claim or contact the customer
should the need arise.
Required tools and materials
• (2) ¾" wrenches
• (2) 9/16" wrenches
• (2) 1½" crescent wrenches
• a torque wrench and a box wrench
• ¾" socket wrench with short extension
• 9/16" socket wrench
• 13/16" socket wrench
• 15/16" wrench and 7/8" socket wrench
with an extension
• pair of wire strippers
• pair of wire crimpers
• silicone sealant (small tube)
BEFORE YOU ASSEMBLE THE DOLLY…
3
