Roadmaster TOW DEFENDER 4800, Быстрый старт

Страница: 7 / 8

5
continued from previous page
10.
With the collar in the correct position, tighten the
two set bolts at the bottom of the collar (Figure 9) with
a 9/16" wrench, until the collar is fixed in place.
11.
When not in use, the Tow Defender may be stored
at the rear of the motorhome — remove the linch pins,
roll the screen toward the motorhome, and loop and
attach one of the two storage straps around each side
of the Tow Defender (Figure 11).
When the motorhome is stationary with the en-
gine idling, the Tow Defender fabric can be warped
or otherwise damaged by the heat from exhaust
systems at the rear of the motorhome. Do not idle
the motorhome engine for an extended period when
the Tow Defender is attached to the motorhome, or
non-warranty damage to the fabric may occur.
The Tow Defender fabric may conceal the towing
system attachment points, as well as the attach-
ment points for other components underneath it.
Before towing, and after every stop, make certain
that the tow bar, safety cables, electrical cord and
any other components which are underneath the
Tow Defender are securely attached, according to
the manufacturers’ instructions.
If a component of the towing system, or any other
component underneath the Tow Defender, has de-
tached and is not reattached, the towing system
or other components may fail, which may cause
property damage, personal injury or even death.
Figure 10
Figure 11