Roadmaster REJ2000, Руководство по эксплуатации

Страница: 3 / 8

1
1. Read All of The Instructions
All of the safety and operating instructions should
be thoroughly read and understood before oper-
ating the jack. If the person operating the jack
is not fluent in English, the product and safety
instructions shall be read to, and discussed with
the operator in the operator’s native language
by the purchaser/owner or his designee. The
operator should comprehend the manuals' con-
tents. All operating and safety instructions for
this product should be followed. If the jack does
not operate according to the product operating
instructions, immediately stop use and contact
Roadmaster at 1-800-445-1797. The safety and
operating instructions should be retained for
future reference.
2. Observe All Warnings
Failure to follow all warning labels on the prod-
uct and warnings in the operating instructions
may result in property damage, personal injury,
or death.
3. Inspection and Maintenance
Visually inspect the jack and all of its compo-
nents before each use for abnormal conditions
such as cracked welds, leaks, and damaged,
loose, or missing parts. Do not attempt to ser-
vice this unit yourself as opening or removing
covers may expose you to dangerous voltage
or other hazards. It is recommended that the
jack be inspected annually by Roadmaster, and
that any defective parts, decals, or safety labels
or signs be replaced with supplier's specified
parts. If the jack is believed to have been sub-
jected to an abnormal load or shock, it should be
inspected immediately by Roadmaster. Contact
Roadmaster Customer Service toll-free at 1-
800-445-1797 for inspection, repair or replace-
ment.
4. Damaged Jack or Components
If the jack, is damaged in any way, found to
be worn, or operates abnormally, remove the
jack from service, and contact Roadmaster
Customer Service toll-free at 1-800-445-1797
for repair or replacement. The jack should not
be operated until repairs are made.
5. Alterations, Attachments and Accessories
Because of potential hazards associated with
this type of equipment, no alterations shall be
made to the product. Only attachments and/or
adapters supplied by the manufacturer shall be
used. Any modification or alterations to the jack
or any of its components will void the warranty.
6. Unstable Ground or Base Warning
Do not use this product on uneven or unstable
ground. Do not use this product near or in water.
Avoid rain, mud, and puddles. Watch out for soft
highway shoulders and/or very hot pavement,
which may not support the jack. Place wheel
chocks (not included) in front of and behind a
wheel diagonally opposite of the vehicle’s wheel
being raised by the jack.
7. Power Sources
This product should be operated only by a
12 Volt DC power source. If you are not sure
what type of power is supplied by your vehicle,
consult a certified automotive technician or the
vehicle’s manufacturer. If you intend to use an
external battery or other power source, refer to
the operating instructions of the power source.
8. Grounding or Polarization
This product is polarized, this feature is to insure
that the jack operates properly. This is a safety
feature. Do not modify the wiring of this unit in
any way.
9. Power Cord Protection
Power supply cords should be routed so that
they will not be walked upon or pinched by items
placed upon or against them. Look for dam-
age where the cords attach to plugs, electrical
receptacles, and at the point where they exit or
attach to the unit. If you find any damage, do not
use the jack.
10. Replacement Parts
Contact Roadmaster customer service toll-
free at 1-800-445-1797 for replacement parts.
Unauthorized substitutions may result in fire,
electric shock, or other hazards.
11. Safety Check
Upon completion of any service or repairs to this
unit, ask the service technician to perform safety
checks to determine that the unit is in proper
operating condition.
Read First!
Important Safety Instructions for
Operation, Maintenance, and Inspection
THIS DEVICE CONFORMS TO
ASME PALD - 2003 (Rev. 1997)