Roadmaster Even Brake 9400, Руководство пользователя, Страница: 12 / 20

Disconnecting Even Brake
continued from preceding page
3. Press and hold the air relief button (Figure 1) until
all the air in the air reservoir is released. If necessary,
continue to hold the air relief button and move Even
Brake back, to allow easier access to the brake pedal.
4. Detach the pedal clamp from the brake pedal. Press
and hold the air relief button and move the pedal clamp
back, toward Even Brake, until the air cylinder shaft is
fully retracted (Figure 5).
5. Wrap the 12-volt power cord and the ICX transmitter
cord around the cord holder, and lift Even Brake out
of the vehicle. (The adjustable seat pad can be used
as a handle.)
6. Disconnect the break away cable (Figure 14) from
the front of the towed vehicle and the motorhome. Do
not remove the large ring and pin from the break away
switch.
CAUTION
Leave the break away pin in place, even when
the vehicle is not being towed…
• If the pin is not in place when Even Brake is
connected, the break away system will be activated
— the air cylinder will extend and will not retract.
• Additionally, as long as the pin is removed, the
ICX transmitter will send a break away signal. This
signal may interfere with or disrupt keyless entry
systems or other remote controlled devices.
10