KIT# 921-3
07/31/13
KS
Fig.M
Fig.N
14. Insert the removable front bracket arms into the front
receiver braces, and secure them in place with the sup-
plied 5/8" draw pins and spring pins.
15. Install the tow bar to the mounting bracket accord-
ing to the manufacturer's instructions. Connect the safety
cables to the safety cable tabs illustrated on the first page
of these instructions.
BASEPLATE KIT
INSTALLATION INSTRUCTIONS
ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 360-896-0407 fax 360-735-9300 www.roadmasterinc.com
Fig.L
11. Tighten all remaining bolts to the bolt torque requirements found at the end of these instructions.
12. On each side, trim the outside horizontal center ribs of the fascia to allow clearance for the main receiver brace. Use
the red lines in Figure N as a guide for trimming.
13. Reassemble the fascia, reversing steps 1 through 9.
BOLT TORQUE REQUIREMENTS
METRIC BOLTS
Thread Size
Grade
Plated / Unplated
12mm-1.25 ........8.8 ............70 ft./lb. 65 ft./lb.
12mm-1.5 ..........8.8 ............66 ft./lb. 61 ft./lb.
12mm-1.75 ........8.8 ...........65 ft./lb. 60 ft./lb.
14mm-2.0 ..........8.8 .........104 ft./lb. 97 ft./lb.
METRIC BOLTS
Thread Size
Grade
Plated / Unplated
8mm-1.0 ............8.8 ............20 ft./lb. 18 ft./lb.
8mm-1.25 .........8.8 ............19 ft./lb. 18 ft./lb.
10mm-1.25 ........8.8 ...........38 ft./lb. 36 ft./lb.
10mm-1.5 ..........8.8 ...........37 ft./lb. 35 ft./lb.
STANDARD BOLTS
Thread Size
Grade
Torque
5/16..................... 5 ........................... 13 ft./lb.
3/8....................... 5 ........................... 23 ft./lb.
7/16..................... 5 ........................... 37 ft./lb.
1/2....................... 5 ........................... 56 ft./lb.
5/8....................... 5 ......................... 150 ft./lb.
Note: The torque values represented below are intended as general guidelines. Torque requirements for specific applications may vary. Roadmaster does not warrant
this information to be accurate for all applications and disclaims all liability for any claims or damages which may result from its use.
