2011
-
2016 Ford Super Duty
(V.20181023) Page ( 2 of 13)
www.
ROADARMOR
.com
INSTALL INSTRUCTIONS
SAFETY FIRST!
•
FOLLOW ALL INSTRUCTIONS, YOUR SAFETY AND THE SAFETY OF OTHERS IS MOST IMPORTANT.
•
WEAR APPROPRIATE EYE PROTECTION AND EXERCISE CAUTION WHEN DRILLING / CUTTING
REQUIRED TOOLS
RECOMMENDED TOOLS
INCLUDED HARDWARE
I
WARNING
Read the instructions completely before beginning installation. Before tightening bolts,
drilling or cutting where required, check to make sure there are no obstructions such as
brake, fuel or electrical lines which may be damaged. Also keep in mind this is an after-
market product and MAY require minor shimming and/or trimming, reaming, etc. for
proper fit. Road Armor is not responsible for any damages to vehicle.
IMPORTANT NOTICE
•
Be sure to inspect and test fit your product to ensure proper fitment before having it coated, painted, bed
lined, etc.
•
Road Armor will not be responsible for the cost of coating your unit if any problems with fit or finish are not
noted and addressed beforehand.
SAE & METRIC Socket set and wrenches
Screw drivers, pry tool, pick tool, pliers
2
Nut Plate (RA)
1 1/2" x 1.062" OD Thru
-
Hardened Yellow Zinc Finish Steel SAE General Purpose Flat Washer
1 1/2" Yellow Zinc Finish High Alloy Medium Split Lock Washer
1 1.5" Single Bolt Tab (ZINC)
1 1/2"
-
13 Yellow Zinc Finish Grade 8 Finished Hex Nut
2
1/4"
-
20 x 3/4" ASTM A307 Grade A Zinc Finish Hex Bolt
2
1/4" x 0.625" OD Low Carbon Zinc Finish Steel SAE General Purpose Flat Washer
2
1/4" Zinc Finish Medium Split Lock Washer
2
1/4"
-
20 Zinc Finish Grade A Finished Hex Nut
6
1/2" Bolt 15/16" O.D. Zinc Pushnut Bolt Retainer
4
3/8” Dome Plug
6
7/16"
-
14 x 1
-
1/4" ASTM A307 Grade A Zinc Finish Hex Bolt
6
7/16" Yellow Zinc Finish High Alloy Medium Split Lock Washer
6
7/16" x 0.922" OD Thru
-
Hardened Yellow Zinc Finish Steel SAE General Purpose Flat Washer
