Installation Contents
Booster Pump
Low Pressure Switch
High Pressure Switch
Solenoid Valve
Auto Flush
Transformer
Please read this entire guide prior to beginning installation.
If at anytime you are unsure how to proceed please contact the support team
by emailing
This Integrated Pump Box has been designed for quick and simple installation and maintenance. By
carefully reading this instruction manual and following the operational guidelines you will ensure a
successful installation with minimum disruption to the system.
Please note that you will be required to cut pipe during this installation.
Installation Guide
These instructions are easy to follow and can be installed in a short amount of time. Should you have any
queries prior to installation, please contact us for further advice and guidance.
Preparation for Installation
Please note that you will be required to cut some pipe during this installation. We recommend using a pipe
cutter for this. Should you not have a pipe cutter, a sharp knife will also be suitable.
