RND RND 305-00026, Руководство пользователя

Страница: 4 / 10

6 7
EN EN
Intelligent Test Charger T1
Intelligent Test Charger
T1
Structure Description:
1
2
3
7 8
Intelligent Test Charger T1
Intelligent Test Charger
T1
Structure Description:
1
2
3
7 8
Intelligently detects faulty or non-rechargeable batteries. When a Ni-MH/CD
battery voltage cell is lower than 0.2V and can't be charged, the LCD display with
show "null".
Features over-charge protection, over-discharge protection, short-circuit protection,
faulty battery detection and reverse charging protection.
and the LCD display with show “null”.
and the LCD display with show “null”.
When the charger is connected to the power supply, all characters with be displayed on
the LCD screen for 2 seconds. The charger will then detect the batteries' condition, if there
are no batteries in the charger or faulty batteries are put in to the charger it will show
"null". Once it detects rechargeable batteries, the corresponding mode and current
indicator will flash. Firstly, you can press the battery slot selection button to select the
battery slots, every slot can be operated independently. If you choose the "CURRENT2
button to select the charging current, 8 seconds later, it will apply the selected charging
current and start the process, or it will start the process with the default 300mA charging
current. The battery symbol with show the charging status. When the charging process has
completed, relevant parameters will be displayed on the LCD screen.
When the charger is connected to the power supply, relevant characters will be
displayed on the LCD screen for 2 seconds. Then, the charger will detect the battery
condition, if no there are no batteries or faulty batteries in the charger, it will show
"null".
Once it detects rechargeable batteries, the corresponding mode and current icon
will flash. Press the "MODE" button to select "Test" mode (300mA by default).
8 seconds later, it will enter the test mode charging condition.