RND 320-KEL Series Скачать руководство пользователя страница 15

Страница: 15 / 17

RND 320-KEL Series

13.

Remote Compensation Function

Note: Press Shift+CW to enter the switch of the remote

compensation function.

Remarks: When there is the remote compensation, the LED COMM will

light on. And there is no memory function.

14.

Keyboard Lock Function

Note: Press Shift+ the keyboard will lock.

Remarks: After the keyboard is locked, only ON/OFF and Shift

are valid. And during the dynamic pulse mode and dynamic

toggling mode, the button 3 is valid. There will be no memory function.

15.

Baud Rate Setting Function

Note: Manually modify the baud rate.

Operation Description: changing the baud rate 57600 to

115200 as example.

Remarks: please modify when there are no communications.

Here there is memory function.

16. Buzzer ON/OFF Function

Note: press Shift+ 1 to switch the buzzer on and off.

Remarks: there are memory function here.

17. Communication with PC

Please refer to the communication protocol.

Remarks: When the keyboard is not locked, press Esc at any time to

return to the steady state mode. From one mode switched to another

mode, press Esc to enter the steady state mode and then switch the

modes.

Содержание 320-KEL Series


















Результаты поиска

Содержание 320-KEL Series

Отзывы:

Бренды по названию

Популярные бренды

RND 320-KEL Series, Руководство пользователя

Результаты поиска

Содержание 320-KEL Series

Отзывы:

Бренды по названию

Популярные бренды