6
Function Introduction
1 The Operation and Outputs of Voltage and Current
1. Press the button CH1 and then the CH1 display indicator blinks; press CH1 again
and then some voltage digit on the channel 1 blinks. At this time, the voltage value
can be set by adjusting the voltage adjustment knob.
Then press the button CH1 again while the voltage digit is blinking to switch into
the current digit blinking, when the current value can be set by adjusting the
current adjustment knob.
Furthmore, when the voltage or current digit blinks, press the voltage or current
adjustment knob and the blinking digit (i.e. the adjusting digit) can be changed.
2. After the voltage and current values are set, press the button ON/OFF to turn
on the output, when the ON indicator on the display will be switched on; press the
button ON/OFF again to turn off the output and at this time the ON indicator will
be switched off.
