RMG TME400, Руководство по эксплуатации

Страница: 70 / 156

4 Operation
MANUAL TME400-VCF · EN08 · July, 01 st 2021
64
q
m min
: minimum operating volume flow
q
m max
: maximum operating volume flow
Example:
q
m min
= 16 m 3 /h
q
m max
= 250 m 3 /h
K
V
= 2362 pulses/m
3
Hz
m s
m
f
V
5 , 10
Impulse
2362
3600
16
3
3
min
=  =
Hz
m s
m
f
V
164
Impulse
2362
3600
250
3
3
max
=  =
A11
Output pulse factor
The output pulse value indicates how many LF output pulses corre-
spond to one m
3
(1 m³).
A12
Meter factor corrected The meter can be adjusted by the operator, e.g. during calibration.
As a display value, this value cannot be changed. This value is only
visible if the Z27 characteristic correction is activated.
A20 Display factor A20: Display factor for meters, including decimal places
0.01 Display with 2 decimal places
0.1 Display with 1 decimal place
1 Display without decimal places (default)
10 Display without decimal places
100 Display without decimal places
Example:
If the factor is adjusted to 0.1, the meter status is displayed with a
decimal place.
Note
If the factor is adjusted, for instance, to 10, the display value
is displayed without a decimal place.
You get the actual meter status by multiplying the display
value by 10.
This setting is marked with a "x 10" sticker (or it must be
marked).
A21 Digital output 2
mode
A21: Digital output 2 mode
0 Operating volume (default)
1 Standard volume