RMG NETWORKS IVS SDA-930, Инструкции по монтажу и подключению

Страница: 27 / 36

27
5. Connect the larger female end of each adapter to a male VGA connection on a
display device. Rotate the pin screws on the male VGA connection(s) clock-wise
to secure the adapter(s).
6. Connect the female end of the power cord to the power input (
5
) and plug the
other end into a standard AC outlet.
7. Briefly press the power switch (
1
) on the IVS SDA.
Note: The first time you connect your IVS SDA, the message “One Moment
Please” may appear on the video display. Depending on your network, this
message might appear for up to one minute. After the IVS SDA boots up, a
“Welcome” screen appears that displays the name of the IVS SDA, its serial
number, and the IP address that you'll need to set up your IVS SDA-960. Use this
IP address to access the Web Interface.
8. Refer to the following IVS SDA configuration guide to configure your IVS SDA-960:
http://support.rmgnetworks.com/documentation/
IVS_SDA_Configuration_v12.0.2.pdf