RME Audio SteadyClock Скачать руководство пользователя | Manualshive

Страница: 12 / 58

background image

12

User’s Guide ADI-8 QS

© RME

CE / FCC Compliance

CE

This device has been tested and found to comply with the limits of the European Council Direc-
tive on the approximation of the laws of the member states relating to electromagnetic compati-
bility according to RL89/336/EWG and RL73/23/EWG.

FCC

This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec-
tion against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own ex-
pense.

RoHS

This product has been soldered lead-free and fulfills the requirements of the RoHS directive.

ISO 9001

This product has been manufactured under ISO 9001 quality management. The manufacturer,
IMM Elektronik GmbH, is also certified for ISO 14001 (Environment) and ISO 13485 (medical
devices).

Note on Disposal

According to the guide line RL2002/96/EG (WEEE – Directive on Waste
Electrical and Electronic Equipment), valid for all european countries, this
product has to be recycled at the end of its lifetime.

In case a disposal of electronic waste is not possible, the recycling can
also be done by IMM Elektronik GmbH, the manufacturer of the ADI-8 QS.

For this the device has to be sent

free to the door

to:

IMM Elektronik GmbH

Leipziger Straße 32

D-09648

Mittweida

Germany

Shipments not prepaid will be rejected and returned on the original sender's costs.

«
...
10
11
12
13
14
...
»

Содержание SteadyClock



























































Отзывы:

Нет отзывов

Похожие инструкции для SteadyClock

Бренд: TDT Страницы: 81

Бренд: Yamaha Страницы: 84

Бренд: Pyle Страницы: 8

Бренд: Advance Paris Страницы: 24

Бренд: Chiayo Страницы: 4

Бренд: Rompa Страницы: 4

Бренд: NAD Страницы: 37

Бренд: AVM Страницы: 12

Bullet Amp PR 241

Бренд: Fender Страницы: 4

Engineered for Art 1707

Бренд: Ovation Страницы: 20

TERROR BASS 500 COMBO

Бренд: ORANGE Страницы: 12

Бренд: Onkyo Страницы: 20

Бренд: Laney Страницы: 9

Бренд: SKYTRONIC Страницы: 8

VDI12.0AMP0067-20-20

Бренд: Virginia Diodes Страницы: 13

Бренд: Hegel Страницы: 12

Бренд: Krell Industries Страницы: 24

Home Theater Standard

Бренд: Krell Industries Страницы: 64

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды