RME Audio OctaMic XTC, Руководство пользователя

Страница: 15 / 62

User’s Guide OctaMic XTC
© RME
15
8.3 Menu Keys
The keys to the left of the display simplify navigation, as they directly jump to specific areas.
PHONES
This key brings up the Phones 1 screen, where the output
level can be directly controlled with encoder 1, and the
signal source with encoder 2. Pressing PHONES again
changes to Phones 2.
The volume of Phones 1/2 can be adjusted directly with
encoder 1 and 2 when the level meter overview is shown in
the display. In that case there is no choice for the signal
source.
GROUPS
The key GROUPS brings up the group screen. Encoder 1 changes between Group All and
Group 1 to 4 . Encoder 2 changes all gains of the corresponding group simultaneously. Their
relative values (the differences of gains between channels) are retained.
Group All
Current group settings are ignored, all 8 channels are affected by gain changes.
Group 1 to 4
The channels not assigned to any group are shown in light
gray to the left (channel number) and right (current gain).
The level meter is always active for all channels. The
OctaMic XTC has 8 channels, therefore no more than 4
groups with 2 channels each can be defined. The group
assignment is defined in the menu CHANNEL - Gain
Group.
Pressing encoder 2 activates the currently selected group,
another push activates the AutoSet function (AS) for this
group. Pressing the encoder a third time switches both
functions off.
CHANNEL
This key gives access to the settings of the analog inputs
Mic 1 to 8 , and the analog outputs Phones 1 and 2 .
SETUP
Direct access to Setups and Options , the latter having the
sub-pages Clock , MIDI Sources , General Settings, MADI
Settings and Digital Routing . A screenshot is shown on the
left page (chapter 8.2).