RME Audio M-32 AD Pro, Руководство пользователя

Страница: 41 / 59

3. If the device should also slave to MADI Auto Input, choose it as clock master in the CLOCK section.
4. Connect both MADI signals with identical audio.
To create MADI redundancy using the web remote:
1. Open the MADI Coaxial input port in the routing view.
2. Toggle the switch "Auto Input" to ON .
9.3. AVB Input Streams
The AVB streams received by the M-32 AD Pro are referred to as "input streams". For these streams, the
device acts as an AVB Listener .
To establish a connection between a talker and a listener, an AVDECC Controller is required. The M-32
AD Pro does not include an AVDECC Controller.
AVB input streams are monitored as follows:
Description Indicator Possible solution
Disabled grey Create connection with AVDECC
controller
Streaming/Receiving green
No Data red Verify proper talker configuration
SR Mismatch red Verify that the sample rates of talker
and listener are identical
Waiting yellow … Waiting for talker to be ready
Talker Fail red Verify proper talker configuration
No Bandwidth red Use faster network speed (1 GBit/s
instead of 100 MBit/s)
Domain Boundary red Reconnect all devices and reboot
switch, ensure only AVB switches are
used
Internal Error red Reboot device
9.3.1. Change AVB Input Stream Size
Each of the four AVB streams can have a size of 4, 8, 12 or 16 channels.
To change the amount of channels in the incoming AVB stream on the device:
1. Open the AVB tabs in the INPUT section.
2. Move the cursor to highlight the corresponding AVB stream size and press the encoder.
RME M-32 AD Pro User’s Guide
9.3. AVB Input Streams | 37