Important Information
Please retain the information in this User Guide for future reference.
Please read all instructions fully before using.
To clean, wipe the cards with a clean damp cloth.
Do not allow the cards to come into contact water or other liquids.
Keep the cards away from direct sunlight and heat when not in use..
In the event of an electrostatic discharge, your card may malfunction. In this case, please
switch it off and then back on again to reset it.
Non-rechargeable batteries are not to be recharged.
Rechargeable batteries are only to be charged by an adult.
Batteries are to be inserted with the correct polarity.
The supply terminals are not to be short-circuited.
Only batteries of equal size and type should be used
Talk-Time Premium cards can record and play back 60s of high quality audio and are
magnetic so they can easily be mounted for display purposes. The white surface is
suitable for use with dry wipe pens. There are three sizes of Premium Talk-Time Cards:
EL00551 A6 IT01154 A5 IT01150 A4
Changing the batteries
The Premium Talk-Time cards all require 3 x AG10 alkaline batteries (supplied). Undo
the screw to release the battery hatch. Carefully slide the battery hatch out and using
a small screwdriver, lift the exhausted batteries from the tray. Insert the new batteries
carefully, making sure they are fitted with the correct polarity. Re-fit the battery hatch
and re-tighten the screw.
Using Your Premium Talk-Time card
Recording
The Premium Talk0-Time cards can record a maximum of 60 seconds of audio. To make
a recording, first move the slide switch to the “On” position. Press the red record button
once and the card will “Beep” to show it is now recording. Speak into the microphone
and when you want to finish recording, just press the red record button again. You will
Premium Talk-Time Cards
Lock/On/
Off switch
Battery
compartment
Record button
Play button
Know your Premium Talk-Time card
Microphone
hear two “beeps” to indicate that the recording has finished. To record another message,
just press the record button again to record over the previous message.
If you want to protect the recording, just move the slide switch to the “Lock” position.
The card will still play back, but recording is disabled.
Playback
To Play back a recorded message, the slide switch must be in either the “On” or “Lock”
position. Pressing the green “Play” button will play back the recorded message. Pressing
the green “Play” button again will stop the playback.
Please switch the cards off when not in use to conserve the batteries.
Problem
Solution
Card will not record
Card will not Play back
Audio is quiet or distorted
Ensure the slide switch is set to “On”
Ensure the slide switch is set to “on” or “Lock”
Sound is too far from, or too close to the microphone.
Batteries need replacing
Specifications
60 seconds
3 X AG10 (User replaceable)
500 playback or recordings (typ)
Record time
Battery type
Battery Life
