Setting Detailed Operational Parameters Using the SDM-PC2 Docking Station PC
Updating the Data Logger Settings
1 . Launch the PC Controller Program and connect your SDM-6000(s) as
described in “Launching the PC Controller Program and Connecting an SDM-
6000” on page 60.
2 . Access the SDM Configuration Window as described in “Accessing the SDM
Configuration Window” on page 61.
3 . Click the Bump & Cal 2 Tab.
Figure 26: Bump & Cal 2 Tab
4 . Use the drop down menu to select the desired setting for the
Data Logger
Auto Download
parameter.
•
OFF
: No data download to the SD card will be performed when a GX-6000
is connected to the SDM-6000.
•
Every Time
: A data download to the SD card will automatically occur every
time a GX-6000 is connected to the SDM-6000.
•
Interval
: A data download to the SD card is performed once per interval. If
this option is selected, the
Auto Download Interval
parameter becomes
active and needs to be set. The
Interval
parameter is described below.