RKI Instruments RI-600, Руководство оператора

Страница: 30 / 61

30
7-2. Maintenance mode
The maintenance mode allows for checking the status of the monitor and adjusting and changing the
settings.
Item LCD display Details
Gas introduction
display
2-0 GAS TEST 2-00: Gas Test
2-01: Alarm Test
2-02: Fault Alarm Test
2-03: Display test
2-04: Not used (----)
Zero adjustment
2-1 ZERO Perform the zero adjustment.
Span
adjustment
2-2 SPAN Perform the span adjustment.
Zero/span
initialization
2-3 SDEF Not used.
Environmental
setting
2-4 SET 2-40: Not used (----)
2-41: Not used (----)
2-42: Alarm Value Setting (AL-P)
2-43: Alarm Delay Time Setting (AL-D)
2-44: Not used (----)
2-45: Zero Suppression Type Setting (SP-T)
2-46: Zero Suppression Value Setting (SAPP)
2-47: Not used (----)
2-48: External Output Adjustment (MA20)
2-49: Not used (----)
2-4A: Date/Time Setting (DATE)
2-4b: Not used (----)
2-4C: Not used (----)
2-4d: Buzzer ON/OFF Setting (BZZR)
2-4E: Gas Alarm Contact ON/OFF (AL-R)
2-4F: External Output Signal ON/OFF
2-4H: LCD Backlight ON/OFF (LCD)
Display 2-5 DISP
2-50
：
Not used (----)
2-51
：
Not used (----)
2-52
：
Calibration Curve Number Display (GSEL)
2-53
：
Fault Detail Display (FALT)
2-54
：
Not used (----)
Factory mode
switching
2-6 F MODE Not used.
User mode
switching
2-7 U MODE Return to the user mode.
WARNING
• When the adjustment is completed, press the MODE button to return to detection mode.
The monitor automatically returns to detection mode after 10 hours.