OX-04 Operator’s Manual
Chapter 5: User Mode and Calibration
•
65
3. Use AIR to display the desired setting.
4. Press and release POWER MODE to save the setting and return to the
BEEP.INT
item in the
BEEP
menu.
5. See “ESCAPE” on page 65 to return to User Mode.
ESCAPE
1. While in the
BEEP
menu, press AIR to scroll to
ESCAPE
.
2. Press and release POWER MODE to return to the
BEEP
item in User Mode.
3. See “Entering Measuring Mode (START)” on page 69 to enter Measuring Mode.
Updating the Backlight Time (BL TIME)
This setting defines how long the LCD backlight stays on when you press any button. The
minimum setting is
OFF
; the maximum setting is
255
seconds. The factory setting is
30
seconds.
1. While in User Mode, press AIR to scroll to
BL TIME
.
2. Press and release POWER MODE. The current setting flashes.
3. Use AIR to display the desired setting.
4. Press and release POWER MODE to save the setting and return to the
BL TIME
item in User
Mode.
5. See “Entering Measuring Mode (START)” on page 69 to enter Measuring Mode.
Turning the Key Tone On/Off (KEY.TONE)
ON
(factory setting): The instrument beeps when a button is pressed.
OFF
: The instrument does not beep when a button is pressed.
1. While in User Mode, press AIR to scroll to
KEY.TONE
.
2. Press and release POWER MODE. The current setting flashes.
BL TIME
KEY .TONE
Содержание OX-04
Страница 97: ...OX 04 Operator s Manual Warranty 97 ...