26
65-2660RK-XX-04 M2A Transmitter Operator’s Manual
When the voltage increases to 10.0 volts, the low power alarm is cleared and the M2A will begin its warm-up
sequence.
Responding to a Low Power Condition
1. Determine and correct the cause of the low power condition.
2. When the input power increases above 10.0 volts, the M2A will begin its warm-up sequence.
3. Verify that the M2A enters normal operation after its warm-up sequence. If necessary, perform a fresh air
adjustment. See “Adjusting the Fresh Air Reading” on page 20.
