16 • 35-3001A-10 Oxygen/Carbon Monoxide Sample-Draw Detector
8. Connect the wires to the applicable detector/transmitter terminal strip at the controller as shown in
Figure 6. Refer to the controller operator’s manual and the controller detector head specification
sheet for the 35-3001A-10 for detector/terminal strip connections specific to the controller.
Figure 6: Wiring the Sample-Draw Detector to a Controller
Red (+)
SIG/ PWR
AMP 2
LEL/IR
OXY
Black (-)
OXY
AMP 1
AMP 2
LEL/IR
AMP 1
S
CO
Oxygen
O XY
Oxygen
Sensor
Blue (S)
+ 24 VDC
+ 24 VDC
4/20 Signal
- (DC Ground)
4/20 Signal
White (+)
T OXIC
Controller or Recording Device
