RKI Instruments 04 Series Скачать руководство пользователя страница 83

Страница: 83 / 98

SC-04

Appendix A: Maintenance Mode • 83

Setting the Date/Time (DATE)

1. From the main menu, place the cursor next to

DATE

2. Press and release POWER MODE. The date and time display with the year flashing.

3. Use AIR to display the desired year.
4. Press and release POWER MODE to save the setting. The month setting flashes.
5. Repeat Step 3 and Step 4 to enter the month, day, hours, and minutes settings. The date

and time are saved and the instrument returns to the

DATE

item in Maintenance Mode.

6. See “Entering Measuring Mode (START)” on page 85 to enter Measuring Mode.

Turning the Password On/Off (PASS-W)

(factory setting): The SC-04 prompts you for a password when you enter Maintenance

Mode. The factory-set password is

0400

but it can be changed.

OFF

: No password is required to enter Maintenance Mode.

1. While in Maintenance Mode, press AIR to scroll to

PASS-W

2. Press and release POWER MODE. The current setting flashes.
3. Use AIR to display the desired setting.
4. If you selected

OFF,

press and release POWER MODE to save the setting and return to

the

PASS-W

item in User Mode.

If you selected

, continue with Step 5.

5. Press and release POWER MODE. The Set Password Screen appears. The current

password displays and the first digit flashes.

6. Use AIR to display a number from 0 to 9.

DATE

2020

4.21

10:40

PASS-W

0400

PASS-W

Содержание 04 Series



































































































Результаты поиска

Содержание 04 Series

Отзывы:

RKI Instruments 04 Series, Руководство оператора, Страница: 83 / 98

Результаты поиска

Содержание 04 Series

Отзывы: