IMS01P08-E3
2
1. OUTLINE
The temperature control module for Ethernet V-TIO-P/V-TIO-Q
has one modular connector (RJ-45) for connection to Ethernet.
This module conforms to Modbus/TCP (Modbus protocol)
operating on TCP/IP of Ethernet.
One this module enables temperature control corresponding to
two channels. It has power supply terminals in addition to
temperature control input and output terminals.
In addition, one digital input (DI) point and two digital output (DO)
points can be optionally added.
Usable modules:
•
Temperature control (TIO) module
[Basic type]: V-TIO-A/V-TIO-C
•
Temperature control (TIO) module
[Extension type]: V-TIO-B/V-TIO-D
(Up to 30 modules)
Ethernet
Network Hub
Computer
(Client)
Ethernet
Temperature control
module for Ethernet
V-TIO-P/V-TIO-Q
(Server)
Control
output
Measured
input
Power supply
input (24 V DC)
Event connector (option)
Digital input: 1 point
Digital output: 2 points
The data request side is called “client” (such as
computer) and the data response (supply) side is called
“server” (SRV).
Basically, one client corresponds to one server (SRV)
(i.e. one to one). However, one client can communicate
with two or more servers depending on the program on
the client side, but two or more clients cannot
communicate with one server.
All data are set by communication. For details, see the
Module Type Controller SRV Ethernet [Modbus/TCP]
Communication Instruction Manual (IMS01P09-E )
.
2. PRODUCT CHECK
Before using this product, check each of the following:
•
Model code
•
Check that all of the accessories delivered are complete.
•
Check that there are no scratch or breakage in external
appearance (case, front panel, or terminal, etc).
V–TIO–
–
– – – /Y
(1) (2) (3)
(4) (5) (6) (7) (8) (9) (10) (11) (12)
(1) Type
P: Module for Ethernet, heat control
Q: Module for Ethernet, heat/cool control
(2) Control action
(Each channel common code)
[For heat control]
F: PID action with autotuning (AT) (reverse action)
D: PID action with autotuning (AT) (direct action)
[For heat/cool control]
B: Heat/cool PID action with autotuning (AT) (air cooling)
W: Heat/cool PID action with autotuning (AT) (water cooling)
(3) Input range
(Each channel common code)
[Thermocouple input]
Type Code
Range
Code
Range
K
K02
0 to 400
°
C
KB9
32 to 752
°
F
K04
0 to 800
°
C
KB8
32 to 1472
°
F
K16
−
200 to
+
1372
°
C KB7
−
328 to
+
2501
°
F
K09
0.0 to 400.0
°
C
KC2
32.0 to 752.0
°
F
K35
−
200.0 to
+
400.0
°
C KC1
−
328.0 to
+
752.0
°
F
J
J02
0 to 400
°
C
JC2
32 to 752
°
F
J04
0 to 800
°
C
JC1
32 to 1472
°
F
J15
−
200 to
+
1200
°
C JB9
−
328 to
+
2192
°
F
J09
0.0 to 400.0
°
C
JC4
32.0 to 752.0
°
F
J27
−
200.0 to
+
400.0
°
C JC3
−
328.0 to
+
752.0
°
F
T
T08
0 to 400
°
C
TB9
32 to 752
°
F
T09
0 to 200
°
C
TC1
32 to 392
°
F
T16
−
200 to
+
400
°
C TB8
−
328 to
+
752
°
F
T06
0.0 to 400.0
°
C
TC3
32.0 to 752.0
°
F
T19
−
200.0 to
+
400.0
°
C TC2
−
328.0 to
+
752.0
°
F
E
E01
0 to 800
°
C
EA8
32 to 1472
°
F
E02
0 to 1000
°
C
EA7
32 to 1832
°
F
S
S05
0 to 1768
°
C
SA6
32 to 3214
°
F
R
R06
0 to 1768
°
C
RA6
32 to 3214
°
F
N
N02
0 to 1300
°
C
NA6
32 to 2372
°
F
B
B03
0 to 1800
°
C
BB1
32 to 3272
°
F
PL
Ⅱ
A02
0 to 1390
°
C
AA6
32 to 2534
°
F
W5Re/
W26Re
W03
0 to 2300
°
C
WA9
32 to 4172
°
F
[RTD input]
Type Code
Range
Code
Range
Pt100
D17
0 to 400
°
C
DC5
32 to 752
°
F
D33
0 to 850
°
C
DC4
32 to 1562
°
F
D16
0.0 to 400.0
°
C DC7
32.0 to 752.0
°
F
D28
−
200.0 to
+
400.0
°
C DC6
−
328.0 to
+
752.0
°
F
JPt100
P17
0 to 400
°
C
PC5
32 to 752
°
F
P23
0 to 600
°
C
PC4
32 to 1112
°
F
P16
0.0 to 400.0
°
C
PC7
32.0 to 752.0
°
F
P28
−
200.0 to
+
400.0
°
C PC6
−
328.0 to
+
752.0
°
F
[Voltage/current input]
Type Code
Range
0 to 100 mV DC
201
0 to 5 V DC
401
Programmable
0 to 10 V DC
501
−
2000 to
+
10000
1 to 5 V DC
601
(Factory set value: 0.0 to 100.0 %)
0 to 20 mA DC
701
Decimal point position can be changed
4 to 20 mA DC
801
*