RK Rose+Krieger RK MultiControl II duo, Руководство по сборке

Страница: 217 / 230

Interval Maintenance work Personnel
Weekly Check the hand switch for soiling. If necessary, clean the hand
switch with a clean cloth.
Important: Do not use cleaning agents containing solvents!
Assembly staff
Monthly Check the electrical connections between the control unit and the
drives for mechanical stress and to make sure they are firmly in
place.
Qualified electrician
Once a year Carry out a safety inspection of the control unit as per DGUV V3. Qualified electrician
8.3 Troubleshooting
Error messages are displayed on the display screen of the hand
switch with a error code (e.g. “E21” ).
The error code can also be signalled in code by the LED display of
the hand switches.
Example error code “E21” :
Long pause
®
2x flash
®
Pause
®
1xflash
®
long paws
(repeat)
Further information:
n
Ä
“Table of error messages” on page 217
To reset the error message, press the function key .
To reset the error message, press and hold both function keys
for 5 s.
Code Description Troubleshooting
“E2”
Error, drive 1 motor current too
high
If the error occurs frequently, check the system for mechanical
overload.
“E3”
Error, drive 2 motor current too
high
Maintenance plan
Error messages
Resetting error messages
Table of error messages
Maintenance and troubleshooting
Troubleshooting
20.08.2021 Control unit RK MultiControl II duo/RK MultiControl II quadro 217