RK Rose+Krieger RK MultiControl II duo, Руководство по сборке

Страница: 208 / 230

Prerequisite:
n The main menu for the hand switch is displayed
Ä
Page 169 .
1. Select the menu via “Control”
®
“Parameter”
®
“Change
parameter” (Fig. 124).
ð
The “Change parameter” menu (Fig. 123) is displayed.
2. Select the parameter as per the table of parameters
Ä
Page
208 .
3. Set the parameter (Fig. 126).
ð
The parameter has been set.
No. Parameter
Default
(MLII)
Min. Max.
1 Stroke display, input of the height for display when extended 1 1 9999
2 Basic height, input of the height for display when retracted: 0
-
% 0 0 9999
3
Unit, input of the unit for the display:
0
-
%; 1
-
cm; 2
-
mm; 3
-
inches
0 0 3
4 Safety edge: 0
-
deactivate; 1
-
activate 0 0 1
5 External stop input: 0
-
deactivate; 1
-
activate 0 0 1
Fig. 124: Selecting a menu
Changing parameters
Fig. 125: Selecting parameters
Fig. 126: Entering a value (example)
Table of parameters
Operating the hand switch with 6 function buttons
Control menu > Parameter menu
20.08.2021 Control unit RK MultiControl II duo/RK MultiControl II quadro 208