RK Rose+Krieger RK MonoLine R, Руководство по сборке

Страница: 108 / 132

Version RK MonoLine R, Z
Size 60/80/120
Personnel: n Assembly staff
Protective equipment: n Protective clothing
n Protective gloves
n Safety shoes
Prerequisite:
n The electric gear unit and/or motor (if available) are secured
against restarting.
1. Place the actuator (Fig. 35/2) at the height of the holes below
the guide carriage (Fig. 35/3).
2. Tighten 2 screws (Fig. 35/1):
Size Screw size Tightening torque [Nm]
60, 80, 120 M4 2
3. Insert and position the slot stones (Fig. 36/1) in the slot of the
guide profile.
4. Place the limit switch (Fig. 36/4) along with a holding plate
(Fig. 36/3) at the height of the inserted slot stones.
5. Tighten 2 screws (Fig. 36/2).
Size Screw size Tightening torque [Nm]
60, 80 M5 4
120 M5 5.9
ð
The limit switch is assembled.
Applicable to
Assembling the actuator
Fig. 35: Assembling the actuator
Assembling the limit switch
Fig. 36: Assembling the limit switch
Assembly
Assembling optional modules > Assembling the limit switch
14.10.2021 Linear unit RK MonoLine R/RK MonoLine Z 108