S3
4.
5.
STEP 6-5 RECEIVER / GYRO / BATTERY INSTALLATION
1.
2.
3.
NOTE:
a) Be sure to keep all the lead wires. etc.,
away from all servo arms,rods and sharp
edge of the helicopter mechanics. After
final installation group these wires
together.
b) It is suggested that both the receiver
and gyro amplifier be isolate from
vibration by wrapping them in foam, then
securing them to the model using
double-sided adhesive tape.
C) Be sure when installing the gyro to the
gyro mounting plate that it does not come
in contact with the frame of the helicopter
and that the mounting surfaces are free
from all, residue, etc. Clean if necessary
to ensure proper adhesion. There are
cutouts in the frame to secure the
gyro sensor with hook and loop tape.
1.
Install the Battery and Receiver
2.
3.
and
Install the Gyro sensor
4.
Install the Gyro Amp or Governor Amp.
5.
Install the the Switch harness
7.
Install the Flight Pack.
6.
Install the ESC.
6.
7.
