RJX Hobby X-Tron 500V2 FBL, Инструкция по сборке

Страница: 3 / 42

TABLE OF CONTENTS
1. Introducion
2. Table of contents
3. Additional Items Required
4. Tools Required
5. Assembly
6. Servo Installation
7. Servo Adjustment
8. Final Servo and Radio Setup
9. Please read before flight
10. Spare Parts List
I1
I2
I3
I4
A1 - A16
S1-S4
S5-S9
R1-R5
Pf1
SP1 - SP5
This manual contains the detailed instructions to build and set up the X-Tron 500FBL. Please follow it to ensure that you
achieve the best performance and mechanical integrity from your finished kit. For those of you who already have
experience with model helicopters, we still suggest that you assemble and adjust your model according to these
instructions for the best results. Please keep your copy of this manual in a safe place and refer to it when replacing
spare parts or upgrading.
Remove oil and grease then apply threadlock. (This applies throughout the manual)
Remove oil and grease. (This applies throughout the manual)
Please refer to the list at the end of this instruction manual when you need spare parts.
Regardless how tight the nuts, bolts and screws are tightened, they will still slowly come loose over a period of time
due to vibration from the helicopter. Should this happen the helicopter will become out of control or severely damaged
causing a very potential dangerouse situation.
We strongly recommend that you apply threadlock to any nuts, bolts or screws that are indicated by these signs.
There are two types of threadlock, blue (medium) and red (hard) . Use blue threadlock on screws
that have to be removed regularly and red threadlock for screws that should be fixed permanently. Clean them
with Alcohol (or similar) before you apply the threadlock.
TO PREVENT LOOSE SCREWS AND BOLTS
HOW TO USE THIS INSTRUCTION MANUAL
Use CA (Superglue or similar) at this point CA
I2