RJS Inspector D4000 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 65

RJS Inspector D4000 Скачать руководство пользователя страница 5

Operator

’s Guide

Inspector D4000

™ Laser

002-7858

RJS, Minneapolis, MN

1

1.0 Preface

1.1 Proprietary Statement
The RJS Inspector D4000 Operator

’s Guide contains proprietary information of RJS. It is intended

solely for the use of parties operating and maintaining the equipment described herein. This infor-
mation may not be used, reproduced, or disclosed to any other parties for any other purpose
without the express written permission of RJS.

1.2 Statement of FCC Compliance: USA
The equipment described in this manual has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide a
reasonable protection against harmful interference when the equipment is operated in a commer-
cial environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with this operator

’s manual, may cause harmful interference

to radio communications. Operating this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the problem at your own expense.

1.3 Statement of FCC Compliance: Canada
This Class A digital apparatus meets all requirements of the Canadian interference-Causing
Equipment Regulations.
Cet appareil num

énque de la classe A respecte toutes les exigences du Règlement sur le maténel

brouilleur du Canada.

1.4 CE:
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with this operator

’s manual, may cause harmful interference to radio commun

i-

cations. Operating this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the problem at your own expense.

1.5 Documentation Updates
RJS strives to provide the best possible documentation. This manual, or any of our manuals, may
be updated without notice.

1.6 Copyrights
The copyrights in this manual are owned by RJS. All rights are reserved. Unauthorized reproduction
of this manual or unauthorized use of the software may result in imprisonment of up to one year
and fines of up to $10,000 (17 U.S.C.506). Copyright violations may be subject to civil liability.

1.7 Unpacking and Inspection
Carefully unpack the components and save the container. If the container is crushed, punctured or
water damaged you can use the container to prove a claim against the carrier. RJS is not respon-
sible for transportation damage.
Your RJS Inspector D4000 is packaged in a custom made container. After removing the unit from the
shipping box makes sure you have:



Main display unit



CR3 Laser and cable



Four size AA batteries



Operator

’s manual



Bar code

“test” symbol sheet

s

«
...
3
4
5
6
7
...
»

Содержание Inspector D4000


































































Отзывы:

Нет отзывов