SETUP MODE
Setup mode allows you to do some basic configuration of the Mini E
ff
ect Gizmo X with no computer
required. To access all of the configuration options, the Mini E
ff
ect Gizmo X editor is also available.
SELECTING MIDI CHANNEL
Configuring the MIDI channel is a very important first step in setting up the Mini E
ff
ect Gizmo X. The Mini
E
ff
ect Gizmo X’s channel needs to match the channel that your MIDI controller is sending on. The Mini
E
ff
ect Gizmo is set by default to send and receive on MIDI Channel 1. To change the send/receive
channel:
Hold the Switch 1 button while powering the Mini E
ff
ect Gizmo X on. The LEDs on the Mini E
ff
ect Gizmo
will cycle a few times, then will turn o
ff
. The Bu
ff
er LED starts flashing at this point. Once that happens,
you can release the button. The Switch buttons will now allow you to select the MIDI channel the Mini
E
ff
ect Gizmo responds to. Use the following chart to select the desired MIDI channel.
Once you’ve set the MIDI channel and options, press the
Bu
ff
er
button. The Mini E
ff
ect Gizmo is now in
normal operational mode.
MIDI
Channel
Switch 1
LED
Switch 2
LED
Switch 3
LED
Switch 4
LED
1
OFF
OFF
OFF
OFF
2
ON
OFF
OFF
OFF
3
OFF
ON
OFF
OFF
4
ON
ON
OFF
OFF
5
OFF
OFF
ON
OFF
6
ON
OFF
ON
OFF
7
OFF
ON
ON
OFF
8
ON
ON
ON
OFF
9
OFF
OFF
OFF
ON
10
ON
OFF
OFF
ON
11
OFF
ON
OFF
ON
12
ON
ON
OFF
ON
13
OFF
OFF
ON
ON
14
ON
OFF
ON
ON
15
OFF
ON
ON
ON
16
ON
ON
ON
ON
17
