RJM ADA-101R Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 10

RJM ADA-101R Скачать руководство пользователя страница 4

SECTION I

SECTION I

SECTION I

SECTION I

ADA

ADA

ADA

ADA----101/R

101/R

101/R

101/R

General Description

General Description

General Description

General Description

The  ADA-101/R  is  a  modular,  high  performance  audio  distribution  amplifier
intended  for  studio  quality  audio  distribution  systems.  It  is  designed  to  be
operated from the RJM AMF-100 mounting frame, or it is pin-compatible with the
Leitch* FR-883/884 audio mounting frames.

The module can be configured as a one-input by six-output monaural, or as two,
one-input  by  three-output  stereo  amplifiers,  just  by  moving  one  internal  jumper.
In the MONO mode only the

Channel A

input connector is used. The

Channel B

input is left unconnected.

All inputs can be connected balanced or unbalanced. Outputs are always
balanced. The unit offers a

±

20dB remotely controlled audio gain, which is

selectable to either remote or local operation.

Each module has its own on-board voltage regulators with fuse protection. Any
failure of a single module will not affect any other.

*Leitch is a trademark of Leitch Technology International, Inc.

«
...
2
3
4
5
6
...
»

Содержание ADA-101R











Отзывы:

Нет отзывов