RJG Lynx OR2-M, Руководство по эксплуатации продукта

Страница: 12 / 34

Lynx™ Shielded Dual‑Relay Output Module OR2‑M | Product Manual
4 RJG, Inc.
MACHINE SEQUENCE OUTPUTS
The eDART software calculations of times and
process variables are based on internal machine
sequences; these are calculated by the
eDART
software using the actual machine sequence
module inputs. Each of the following machine
sequences represents a status or function of
the machine and can be sent from the OR2‑D
module as an output signal:
•
Injection Forward
•
Fill
•
Pack
•
Hold
•
Plastic Cooling
•
Screw Run
•
Mold Opening
•
Mold Closing
•
Mold Clamped
•
Mold fully open
•
Auxiliary
VALVE GATE OUTPUTS
The OR2‑M is often used to provide a signal
to a valve gate to open or close the gate.
The shielded dual‑relay output module
cable C‑OR2‑M‑3M is wired to the valve
gate solenoid which accepts the signal; the
C‑OR2‑M‑3M is connected to the OR2‑M,
which collects the signal for use from the
eDART . In the eDART valve gate software,
the module is configured to open, close, or
enable the gate; refer to the
eDART Valve Gate
Software manual for all instructions.
1.
Open Gate
The valve gate output sends a signal to open a
gate.
2.
Close Gate
The valve gate output sends a signal to close a
gate.
3.
Enable Gate
The valve gate output sends a signal to enable a
gate.
OPERATION ( continued )