manualshive.com logo in svg

RJG 211M18, Руководство по эксплуатации продукта

Поделиться
Скачать
RJG 211M18 Скачать руководство пользователя страница 28

Piezoelectric Load Washer Sensor 211M18 | Product Manual

20

2

3

1

CABLE AND CASE ISSUES
CABLES

4. Sensor cable is pinched during mold 

assembly (

1

 at right).

5. Sensor case is mounted on surface that 

exceeds temperature rating.

• 

Do not mount the Lynx case on surface 

that exceeds the recommended 

temperature rating. Contact RJG, Inc. 

Customer support for high‑temperature 

applications.

SENSOR ADAPTER CASES

6. Sensor adapter case is drilled to 

accommodate alternate mounting (

2

 at 

right).

• 

NEVER drill a sensor adapter case. 

Failure to comply will result in damage 

or destruction to equipment and void of 

warranty.

7. Orientation of Lynx connector on sensor 

adapter case is altered from OEM (

3

 at 

right).

The Lynx connector on the sensor adapter 

case is keyed. DO NOT attempt to change 

key orientation by loosening or tightening 

the Lynx connector on the sensor adapter 

case. Failure to comply will result in 

damage to equipment and void of warranty.

Содержание 211M18









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды