10
TAC
-
300 Revision 6
DG100 MAINTENANCE PRECAUTIONS
The DG100 is designed to need very little maintenance to meet its
functional requirements. Although it is built for the rigors of underwater
use, the DG100 is a precision instrument and should be treated as
such. Avoid violent bumps and drops that could affect the pressure
transducer and reliability of the gauge. Do not exceed the maximum
depth of 330ft (100m) as this may damage the unit.
DG100 MAINTENANCE AND STORAGE
After every use, clean the DG100
-
use mild soap and rinse with fresh
water. Store in a cool and dry location when not in use. Replace the
strap if it becomes frayed or damaged.
TAC300
-
1 UNDERWATER COMPASS
The TAC300
-
1 Underwater Compass is designed and manufactured
for the rigors of underwater use. The rugged housing is depth
compensated and should give you many years of dependable use with
proper care. A black compass card with luminous heading markers
allows you to maintain a course heading, even in the worst visibility, for
up to eight hours.
Illuminating the compass can be achieved by shining a bright light or
UV light on the compass card for several minutes. This activates the
luminous properties of the card and allows you to visually see the
compass at night or in poor visibility conditions for up to eight hours.
The longer you expose the card to light, the longer it glows
underwater.
TAC300
-
1 UNDERWATER COMPASS MAINTENANCE
The TAC300
-
1 Underwater Compass requires very little care.
However, this is a precision instrument and should be treated as such.
The entire compass should be periodically removed from the TAC
-
300
Board and rinsed with clear water and dried with a soft cloth to main-
tain clear vision. If air bubbles appear in the dome or any other prob-
lems should occur, contact RJE International, Inc. for service.
TAC
-
300 Revision 6
3
PREFACE
PROPERTY
The information, descriptions, photos, and illustrations in this manual
are the property of RJE International, Inc. Materials may not be
reproduced or disseminated without prior written consent of RJE
International, Inc.
WARRANTY
RJE International, Inc. warrants the TAC
-
300 and associated
equipment to be free of defects in material and workmanship for a
period of one year from date of delivery to the original purchaser.
Obligation under this warranty is limited to repair or, at the sole
discretion of RJE International, replacement of any product returned to
our facility or authorized distributor. All products shall be shipped to
RJE
FREIGHT PREPAID
and shall be returned to customer
FREIGHT
COLLECT
. Equipment may not be returned without prior
authorization which must be requested in writing. Upon authorization a
Case Number will be issued. The Case Number must appear on the
outside of the shipment, as well as in all pertaining correspondence.
Shipments received without a Case Number will be refused by RJE
International. This warranty does not apply in cases where the product
malfunctions as a result of mishandling or improper use.
LIABILITY
RJE International, Inc. assumes no liability for damages, losses, or
cost incurred consequentially through operation or malfunction of any
RJE International, Inc. product.
C
HANGES
RJE International, Inc. reserves the right to make changes in design or
specifications at any time without any obligation to modify previous
units. This manual is provided for information and reference purposes
only and is subject to change without notice.
We always welcome our customer
’
s feedback and product
improvement ideas. If you have any questions or comments, contact
us at:
RJE International, Inc.
15375 Barranca Pkwy, Ste. I
-
112, Irvine, CA 92618
Ph.: (949) 727
-
9399 Fax: (949) 727
-
0070
Email: [email protected] Website: rjeint.com
