STEP 5
OPEN BAG L1B STEERING PARTS. THREAD
ONE 7206 PLAIN NUT (THIN ONES) ON EACH 5377
KINGPIN ( THE PLAIN ONES WITH THE LONGER
THREADS). INSERT THEM THROUGH THE ENDS OF
THE FRONT AXLE PLATE AND RETAIN WITH A 7207
LOCKNUT ON EACH ONE.
STEP 6
INSERT A 5364 STUB AXLE IN EACH 5351
STEERING BLOCK AS SHOWN AND SNAP A 5221 E-
CLIP TO RETAIN IT. SLIDE EACH STEERING BLOCK
ON A KINGPIN(TRIM ANY FLASH FROM THE HOLE IF
IT IS TIGHT) LUBE EACH KINGPIN WITH SILICONE OR
LIGHT OIL.
STEP 7
ADD A 5228 SPRING, WASHER , AND E-CLIP
ON EACH KINGPIN. YOU CAN SCREW THE OTHER
TWO LOCKNUTS ON THE STUB AXLES UNTIL IT IS
TIME TO INSTALL THE TIRES.
STEP 8
INSTALL THE FRONT BODY POSTS (LONGER
ONES) ON THE FRONT AXLE PLATE WITH 3/8 CAP
SCREWS . ADD TWO POST NUTS ON THE POSTS.
STEP 9
INSTALL THE TWO REAR POSTS ON THE
REAR MOUNT IN THE SAME MANNER AS THE FRONT
ONES.
STEP 10
OPEN BAG L2 DIFF KIT. INSTALL A 5188 AXLE
HEIGHT ADAPTOR ON EACH CHASSIS SIDE AND PRESS A
5452 REAR BUSHING IN EACH ONE.
2
