6
J. Operation of LCD display type (DR-20D/22D)
1. Display Mode
Device
Set, tick Display function box
The recording values will display in LCD continuously while recording (Display type
only). User could press and hold button for 5 seconds to turn off LCD display.
Press button again to turn on LCD display.
2. None Display mode (Default)
Device
Set, NOT tick Display function box
User could press button to display the measurement value for 3 seconds even
turn off the display function.
K. Real Time Display
※
Real-Time record mode only available when connected data logger to PC.
1. The data logger (display type) will update the real-time value on PC synchronous.
2. The data logger (display type) will show up blink
symbol if user unplugs the
logger while processing real-time function. There are three ways to deal with it:
2.1 Re-plug logger to docking station within 30 seconds to continue real-time
function.
2.2 Press button within 30 seconds to stop real-time function instantly.
2.3 The data logger will stop real-time function automatically if user unplug data
logger from docking station over 30 seconds,
L. LCD Display Flowchart
1. DR-20D
LCD Display of DR-20D described as below
Condition
Display content
LCD Display
Temperature/Max./
Min. value display
Temperature value
Maximum Temp. value
Minimum Temp. value
Temperature/Alarm
value display
Temperature value
Hi.A of Temperature value
Lo.A of Temperature value
Temperature/Max./Min. Values
Temperature Alarm Values
⑥
⑦