RIVVAL RP05520/10, Руководство пользователя

Страница: 4 / 16

Issue 4 Original version March 2010
4
[1] SPECIFICATION
Maximum hole cutting capacity in .2/.3C steel 52mm dia., 52mm deep.
Arbor bore 19.05mm dia. (3/4" dia.)
Motor Unit: *Speed 630 rpm
*Torque 4.0 da Nm
(cont)
*kW 2.4 (cont)
Magnet: Manually operated
Tractive force at 20°C(25mm min. plate thickness)
The use on any material less than 25mm thick will progressively
reduce the magnetic performance. If possible substitute
material should be positioned under the magnet and work piece
to equate to a suitable material thickness. If this is not possible
an alternative secure method of restraining the machine MUST
be used. Failure to do so may result in personal injury.
700kgs
Overall
dimensions: Height (max. extended)
Height (min)
Width (inc. capstan arms)
Overall length (inc. guard and magnet handle) 550mm
470mm
180mm
315mm
Nett weight: 23kgs
Hydraulic
supply
required: Inlet Pressure
Oil Flow (L/min)
140 Bar (2050 psi)
20 (cont)
25 (int)
Sound pressure level (Ear protectors must be worn).
Note: The figures quoted are emission levels and are not necessarily safe working
levels. Whilst there is a correlation between the emission and exposure levels, this
cannot be used reliably to determine whether or not further precautions are
required. Factors that influence the actual level of exposure of the workforce
include characteristics of the work room, the other sources of noise, etc. i.e. the
number of machines and other adjacent processes. Also the permissible exposure
level can vary from country to country. This information, however, will enable the
user of the machine to make a better evaluation of the hazard and risk.
78 dB(A)
3/8" B.S.P. Male Connection Point

Only when using a 100% hydraulic oil medium.
The motor should be purged with light lubricating oil after use.
NB: ANY MODIFICATIONS TO THIS MACHINE WILL INVALIDATE THE GUARANTEE