Rivet King RK-4500, Инструкция по эксплуатации

Страница: 12 / 30

12
9.
Insert the parts in the order shown in (Drawing 9),
and use the screwdriver and pipe spanner supplied
to attach the slide pipe.
If the slide pipe is tightened too hard,
it will be difficult to remove, and could cause
damage to the head of the screwdriver.
10. Connect the air coupler, return the air cycle to its
starting point, and disconnect the air coupler.
（
Drawing 10
）
When doing this, the nose will come forward,
keep the hands clear to avoid injury.
11. Use the supplied screwdriver with tube attached to attach the slide guide inside the cap case.
(Drawing 11)
Use the open-end wench supplied (sizes 14mm and 15mm) to attach the nosepiece.