Made in Viet Nam
email: [email protected]
FURNITURE
Riverside
Madison
Panel King Bed
Assembly Instructions
ASSEMBLY STEPS :
2. Carefully position one end of one Bed Rail (R-A) onto the All-thread
Bolts installed on the Headboard and connect using the Half moon
washers (R-B), Spring washer (R-C) & Hex Nuts (R-D). Only partially
tighten the Nuts until the Footboard has been connected. Repeat for
other Bed Rail.
3. Position and connect the Footboard (F-A) to the other end of the Bed
Rails, attaching as in the previous Steps.
4. Carefully align the Footboard to be 'square' with the Headboard.
Using the Open Wrench (R-E) tighten all Hex Nuts attaching the Bed
Rails to the Headboard and Footboard. (See Detail D).
5. Attach the four Support Legs (F-C) to the bottom side of four Wood
Slats (F-B). (See Detail E).
6. Position and attach the Slats to the Bed Rails using the Wood Screws
(F-D) and your Phillips Screwdriver. (See Detail F).
The levelers located at the bottom of the Support Legs can be adjusted if
necessary to help support the Slats.
Bed rail
Detail: D
Bed rail
Headboard
R-A
F-D
Detail: F
R-A
Footboard
Detail: E
F-C
F-B
8 pcs.
4 pcs.
leveling
R-B
R-C
R-E
R-D
Page 5 of 5
