email: [email protected]
Typical steps to replace bulbs in most common
lighting fixtures that use halogen bulbs.
Page 2 of 2
Before replacing halogen puck light bulb,
unplug power cord from wall outlet to
remove power to fixture.
To replace bulb, twist lens cover counter-clockwise
and lift off cover to remove.
Grasp old bulb and pull straight out of socket.
Install new bulb by inserting pins firmly and fully
back into socket. DO NOT TOUCH NEW BULB
WITH BARE FINGERS.
Please see instructions.
Replace lens cover back on fixture and lock in
position by twisting cover clockwise.
Before replacing halogen task light bulb,
unplug power cord from wall outlet to
remove power to fixture.
Using your Phillips screwdriver, loosen the two
screws on each end of light fixture three to four
turns each.
Slide the glass lens out from underneath brackets on
the ends.
Grasp old bulb and pull straight out of socket.
Install new bulb by inserting pins firmly and fully
back into socket. DO NOT TOUCH NEW BULB
WITH BARE FINGERS.
Please see instructions.
Slide glass lens back in place underneath the
brackets and retighten the four screws.
