Page 3 of 4
Made in Viet Nam
email: [email protected]
FURNITURE
Riverside
ASSEMBLY STEPS :
To prevent possible damage to furniture and personal injury, it is recommended that two people are used
to perform the following steps.
5. Install All-Thread Bolts (R-B) into the Headboard Posts and the Footboard.
6. Carefully position Bed Rail (R-A) onto the All-thread Bolts on the Headboard and the Footboard and
connect by using the Arc Washers (R-F), Flat Washers (R-E), Spring Washers (R-D), and Hex Nut (R-C).
Carefully align the Footboard and Headboard to be 'square' with the Side Rails. Tighten all Hex Nuts by
using Open Wrench (R-G). (See Detail C).
7. Attach the four Support Legs (F-C) to the bottom side of four Wood Slats (F-B). (See Detail D).
8. Position and attach the Slats to the Bed Rails using the Wood Screws (F-D). (See Detail E).
Aberdeen
Queen Bed
Assembly Instructions
Bed rail
R-G
Detail: C
Footboard
Bed rail
Headboard
Adjustable leveler
