Made in China
Page 2 of 3
Step1: Assemble the Left and Right Arm to the Seat & Back Frame using a 1-1/2" long Allen
Head Bolt (H), Spring Washer (I), and Flat Washer (J), at the front of the Arm. Do not fully
tighten bolt until after fully attaching back end of arm. Attach the back end of the Arm to the
Chair Back, pulling the parts snug together, and using your Phillips Screwdriver, install a
1-3/4" Wood Screw (K) into the chair back. Tighten the Bolt at the front using the Allen
Wrench (G). Repeat for other Arm.
Step 2: Turn the Seat Cushion (D) upside down and place it onto the corner of a table with the
front edge facing inward. Carefully turn the chair assembly upside down and center it on the
bottom side of the Seat Cushion. Attach the Seat Cushion using the four 1 3/4" long Wood
Screws (K) and your Phillips Screwdriver.
Step 3: Assemble the Wood Caps (C) onto the top of the Metal Base. Pivot the metal plates
across each metal leg and attach using the 5/8" long Wood Screws (L) and your Phillips
Screwdriver.
Step 4: Attach the Casters (N) at the ends of the metal base. Tighten with the Open Wrench (M).
M
FURNITURE
Riverside
email: [email protected]
Step 3
Step 1
Step 2
Install and tighten Wood
Screw at back end of Arm
before fully tightening bolt
at front end.
N
Step 4
24538
Bristol Court Desk Chair
Assembly Instructions
