#21357-2
Made in Viet Nam
Page 2 of 2
Aberdeen
Dining Room
Assembly Instructions
Step 2: Assemble the left and right side stretchers (D) to the chair back (do not install wood
screws until after the next step).
Step 3: Assembled the middle stretcher (E) between the two side stretchers and assemble
the front legs (C) onto the side stretchers and chair seat. Pull the front legs and all stretchers
snugly together to verify the parts are assembled correctly. Attach the front legs using the
2-1/4"
long bolts (H), and the same washers as before. Set the assembled chair upright on a
flat surface to level the chair. Tighten all bolts using the allen wrench supplied.
Step 4: Pull the front legs, all stretchers and chair back snugly together and using your phillips
screwdriver, install the wood screws (L & M) underneath each end of the stretchers as shown.