#21357-1
Components and Hardware List (for one chair)
Made in Viet Nam
Page 1 of 2
Aberdeen
Dining Room
Assembly Instructions
Be sure to check all packing material carefully for small parts,
which may have come loose inside the carton during shipment.
Step 1: Place the chair back on a padded surface, and assemble the chair seat to the chair back (as
shown Step 1), using the
1-3/4"
long bolt (G), in the middle of the back, and the washers as shown.
Install the
3"
long bolts (F), using the same washers, into the back corners of the chair seat.
Do not fully tighten any bolts until after the chair has been completely assembled.
#21357
Uph Side Chair
Separate and check all parts against the Components Hardware
List above.
