Check for parts online at
www.HuntRiversEdge.com
or call 800-345-6007 M-F 8-5
11
Operator's Manual
UPPER CUT 1-MAN Ladder Stand
STEP
10
STEP
9
1
24
20
38
15
24
9. Ladder sections are assembled on the ground in the following
order: bottom ladder section (16), two middle ladder sections (15)
and the top ladder section (14) with the treestand top assembly.
Connect all sections together using six lockpins (24).
SEE FIGURE 9.
14
15
16
10. Slide the stabilizer bar (1) into the stabilizer support bar (20) and
secure using a lockpin (24). Make sure the lockpin passes through
the support bar (20) and the stabilizer bar (1) at the appropriate
hole to achieve the desired distance from the tree. Adjustment in
length may be needed when ladder is uprighted later in the Setup
and Use Instructions. Connect the stabilizer bar assembly through
the lower middle ladder section (15) with one wing bolt (38) and
one wing nut (39).
SEE FIGURE 10.
NOTE: Treestand should ALWAYS be fully assembled on the
ground prior to mounting it in the tree.
ground
15
39
Содержание RE659
Страница 6: ......