Rivers Edge LOCKDOWN 21, Руководство оператора

Страница: 8 / 20

Operator's Manual
LOCKDOWN 21 2-MAN Ladder Stand
Check for parts online at www.HuntRiversEdge.com or call 800-450-EDGE (3343) M-F 8-5
8
10
39
35
30
6
10
6
5/16 x 18 x 3-1/4in Bolt - Qty 4
31 35
5/16-18 x 2-1/2in Bolt - Qty 2
5/16in
Nut
Qty 2
30 35
9. Attach the seat (10) to the rear seat supports (6) between the armrests
and upper tree blade using two 5/16-18 x 2-1/2in bolts (30), eight yellow
M8 plastic washers (39) and two 5/16in locknuts (35). SEE FIGURE 6.
NOTE: Hardware should be arranged from the outside to the inside
as follows: 5/16-18 x 2-1/2in bolt (30), yellow washer (39), rear seat
support (6), two yellow washers (39), seat (10), yellow washer (39),
5/16in locknut (35).
M8 Yellow
Washer
Qty 8
39
5/16in
Nut
Qty 4
31
6
2
37
35
8
35
31
9
7. Attach the top of the right armrest (8) and the top of
the left armrest (9) to the rear seat supports (6) using
two 5/16 x 18 x 3-1/4in bolts (31), 5/16in washers
(37) and 5/16in locknuts (35). Make sure that the seat
posts are pointing inwards. SEE FIGURE 5.
NOTE: Make sure that the armrests are attached to
the second holes above the upper tree blade frame.
If the TearTuff
™
backrest has slid over the holes, you
may need to loosen the hardware of the backrest
spreader to slide the backrest upwards. The washer
between the armrest and the seat support should
not rest on the mesh, slide mesh up until washer
contacts only metal.
8. Attach the bottom of the right armrest (8) and the
bottom of the left armrest (9) to the rear platform (2)
using two 5/16 x 18 x 3-1/4in bolts (31) and 5/16in
locknuts (35). SEE FIGURE 5.
FIGURE
6
FIGURE
5
37
5/16in
Washer
Qty 2