Check for parts online at
www.HuntRiversEdge.com
or call 800-450-EDGE (3343) M-F 8-5
9
Operator's Manual
Hang-On Stands
THREADING THE FLOAT BUCKLE
Always check the condition of your Big Foot strap before use. If strap
becomes twisted or if you need to replace a worn or damaged strap,
make sure to follow these instruction to ensure proper assembly.
1. Hold float buckle so warning tag faces upward.
SEE FIGURE 11
2. Feed end tail of strap up through the bottom of the float buckle on
the snap-hook side of the roller bar.
SEE FIGURE 12
NOTE: Smooth side of end tail must face snap-hook.
3. Feed end tail over roller bar and down through float buckle.
SEE FIGURE 13
4. Pull end tail away from float buckle.
SEE FIGURE 13
!
FIGURE 13
FIGURE 11
!
warning tag
float buckle
snap-hook
!
FIGURE 12
snap-hook
roller bar
end tail
of strap
smooth side
WARNING
All
users are responsible for ensuring strap is attached
to treestand properly and securely. Failure to do so may
result in serious injury or death. Read and understand
all instructions for proper installation procedure and
product warnings before use.
WARNING
Only
use approved RETI parts. Failure to do so may result
in serious injury or death!
WARNING
It is critical to familiarize yourself with how the strap
attaches to the stand. Practice attaching the stand to the
tree several times at ground level before ascending up
the tree.