Check for parts online at www.HuntRiversEdge.com or call 800-345-6007
10
Operator's Manual
JUMBO JACK 1-MAN Ladder Stand
STEP 5
STEP
6
5. Thread the M6 x 70 MM bolt (33) all the way into the seat
tensioner (6).
To assemble the seat (16), slide the seat tensioner (6) through the
right seat tube and into the left seat tube so that the head of the
M6 x 70mm bolt (33) bottoms out on the inside of the capped seat
tube.
Secure the seat tensioner (6) to the seat (16) using one 1/4-20 x
1-1/2 IN bolt (25) and nut (30).
Insert the 22 MM plug (38) into the end of the right seat tube.
Using the provided allen wrench, tension the seat slightly by
inserting the wrench through the hole in the capped seat tube
and into the M6 x 70 MM bolt (33). Turn counter-clockwise to
tension the seat. Final desired seat tension can be done once the
seat is assembled onto the rest of the treestand.
6. Attach the seat assembly to the rest of the treestand using two
1/4-20 x 2-3/4 IN bolts (27), four yellow washers (34), two yellow
spacers (35) and nuts (30).
Attach the backrest spreader (17) to the left and right seat
supports (18 and 19) using two 1/4-20 x 1-1/2 IN bolts (25) and
nuts (30).
17
30
25
15
18
19
16
VIEW A
VIEW B
Turn Counter
Clockwise to
Tension Seat
16
38
30
25
33
6
34
34
27
FIGURE
6A
30
35
