- 7 -
STEP 7
STEP 7
1. Press 4 plastic caps (F) into the wood screw holes on the 2 side frames (2).
2. If added pressure is needed to keep the plastic cap in place – cover the cap with a piece of paper
and tap lightly with a hammer to secure the cap.
STEP 8
STEP 8
1. Drill 2 holes on the wall by using the template drawing(included) w/hole positions as a guideline.
2. Insert 2 plastic anchors (H) into the holes on the wall.
3. Insert 2 wood screws (G) through the holes on the back cross bar (7) then tighten to the 2 plastic
anchors (H) with a Philips screwdriver.
