STEP 1
1. Place top board (1) and bottom board (3) upside down on a soft padded surface.
2. Attach upper rear cross bar (6) to top board (1) by inserting 3 screws (B) through holes
on upper rear cross bar (6) and tighten to top board (1).
3. Repeat step above to assemble 1 cross bar (7) to top board (1).
4. Attach 1 cross bar (7) to bottom board (3) by inserting 3 screws (B) through holes on
cross bar (7) and tighten to bottom board (3).
5. Repeat step above to assemble other cross bar (7) to bottom board (3).
STEP 2
1. Attach 1 upper side frame (2) to top board (1) by inserting 2 screws (A) through holes on
upper side frame (2), then tighten to upper rear cross bar (6) and cross bar (7) by using
Allen wrench (F). When tightening, slightly push screw in to catch inner thread.
2. Attach shelf (4) to upper side frame (2) by inserting 2 screws (A) through holes on upper
side frame (2) and tighten to shelf (4) by using Allen wrench (F).
